MTM Medium Speed Trapezium Mill
MTM medium speed trapezium mill adopts numbers of national patents, such as trapezium working surface, flexible connection, roll linked pressure boosts etc. MTM mill has completely overcome defects of traditional mill in amplification fields, capacity, fineness, energy consumption and service life etc.
MTM medium speed trapezium mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, and mining etc. MTM mill can produce powder from non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as barite, limestone, quartz, calcite, granite, porcelain clay, basalt, gypsum etc. The final size is between30—400mesh. Fully considered the needs of desulfurization, MTM Medium Speed Trapezium Mill could perfectly work with desulfurization equipments to increase the efficiency of desulfurization. So it is the best choice of desulfurization.
MTM Trapezium Mill Features
1. The ladder-shaped rollers and rings improve crushing efficiency greatly. The rollers and ring are designed in the main machine of an inverted trapezium, which control the material’s slip velocity between rollers and rings. They can extend the grinding time, and enhance the crushing effect.
2. The press springs with balancing and pressurized function and the forming resilient connection with steady and vibration reducing function are invented into our machines. The symmetrical roller assembly is connected by horizontally-placed spring rod. When the large materials impact one roller assembly, to keep balance, the radial force will pass to another roller assembly, which is on the plane of symmetry through spring rod. Under this condition, the whole device's bearing is improved to be 40% on the other mills; and the forming resilient connection can reduce the vibration and noise, also it can avoid resonance.
3. The powder classifier adopts high density impeller, which can increase precision of powder and capacity. It has been proved that: under fixed spindle speed, to enhance the density of impeller is to enhance the fineness of final products. In other words, when the fineness of final product is fixed, the spindle speed of high density impeller is lower than the low density one. Thus under the same power, our machine can reduce resistance of air’s flow, the capacity can be improved more than 50% over the traditional one.
4. There is high-efficiency and energy-saving blower installed on our machine. The efficiency of prismatic blade equipped on the traditional machine is only 62%, but the efficiency of the energy saving blower, whose impeller and blade are both stamping, is 85%.
5. There is convenient impeller adjusting device. The clearance between housing and ending of powder classifier’s blade also effects fineness. Our mill is convenient to adjust the fineness.
MTM Trapezium Mill Principle
The motor drives the grinding table through decelerator. The materials fall down the center of grinding table from feed opening. At the same time, hot air comes into the mill from the air inlet. Due to the centrifugal force, materials move to the edge of the grinding table. The materials are pulverized by the roller when by pass of the groove on the grinding table. The crushed materials are brought up by vane high-speed airstream, the larger particles fall down to the grinding table for regrinding. When the materials in the airstream pass the separator on the top of the mill, the coarse powder fall down the grinding table for regrinding under the function of rotation rotor. The fine powder comes out with the airstream,and is gathered by the dust catcher. The materials content with moisture will be dried when they meet the hot airstream. Through adjusting the temperature of the hot airstream, it can meet different material's requirement, and also through adjusting seperator, it can reach proper fineness of materials.
MTM Trapezium Mill Data
| Item | MTM100 | MTM130 | MTM160 |
|---|---|---|---|
| Number of roller | 4 | 5 | 6 |
| Major diameter of roller × Height(mm) | Φ320×200 | Φ410×240 | Φ440×270 |
| Internal diameter of roller × Height(mm) | Φ980×200 | Φ1280×240 | Φ1600×270 |
| Main engine spindle speed(mm) | 130 | 103 | 82 |
| Maximum feeding grain size(mm) | <25 | <30 | <35 |
| Grain size of finished product (mm) | 1.6 －0.038 | 1.6 －0.038 | 1.6 －0.038 |
| Output (t/h) | 3 － 8.8 | 6 －13 | 13 －22 |
| Overall dimension (mm) | 9910×5365×8310 | 7910×7000×9645 | 12550×5700×8355 |
| Weight(t) | 16 | 26.1 | 35 |
Note: This specification is just reference, any changes are subject to the MTM Trapezium mill products.
MTM Mill Price
Please complete the order form, and we would supply you the price and other information about our machine. We would keep a secret about your personal information.